MorphoWave
TM
OEM
– Installation guide
Section 1 :Introduction
14
IDEMIA
D
OCUMENT
–
R
EPRODUCTION AND
D
ISCLOSURE
F
ORBIDDEN
2015_2000009096 V6
January 2019
Caution with Power over Ethernet (POE) usage Avertissement sur
l’alimentation électrique par cable Ethernet (Power over Ethernet
POE)
After use, the temperature of the POE module (optional) may be high:
after power cut off, wait 5mn before working on connectors area.
Après utilisation, la température du module POE (en option) peut être
élevée: après la mise hors tension, attendez 5mn avant de travailler sur la
zone des connecteurs
Europe information / Information p
our l’Europe
IDEMIA hereby declares that products delivered (MorphoAcces Sigma, MorphoWave
Desktop) with the MorphoWave
TM
OEM bundle have been tested and found compliant
with following listed standards:
EMC Directive 2004/108/CE.
R&TTE Directive (1999/5/CE).
ROHS Directive 2011/65.
IDEMIA déclare par la présente que les produits livrés (MorphoAcces Sigma,
MorphoWave Desktop) avec le pack OEM MorphoWaveTM ont été testés et jugés
conformes aux normes suivantes :
Directive EMC 2004/108/CE.
Directive R&TTE (1999/5/CE).
Directive ROHS 2011/65.
USA information / Information pour les USA
Devices comply with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) these devices may not cause harmful
interference, and (2) these devices must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Responsible Party:
IDEMIA
2 Place Samuel de Champlain
92400 Courbevoie - France
