9
2
INSTALLING YOUR PHONE
2.1
Connecting the Base Station
1)
Plug the mains power cable and
telephone line cord into the base
station.
2)
Plug the power adapter into a
100 - 240Vac, 50 - 60Hz mains power
socket, and the telephone line cord
into a telephone line socket.
Warning:
Always use the cables provided in the box.
Use only the supplied adaptor. Using other power cables may damage
the unit.
Note:
Place the base unit within easy reach of the mains power socket. Never
try to lengthen the mains power cable.
The base station needs mains power for normal operation, and the
cordless handsets will not work without it.
2.2
Installing and Charging the Rechargeable Batteries
1)
Insert the 2 supplied batteries into the
battery compartment, observing the
correct polarity (see markings inside
battery compartment).
Warning: Use only the supplied NiMH
rechargeable batteries.
2)
Place the back cover over the back of
the handset and press down until it
clicks into place.
3)
Place the handset on the base and
charge for 15 hours before using the
handset for the first time.
•
The handset will give a double beep when it is properly placed on
the base or charging cradle.
•
The battery charging indicator on the base or charging cradle
lights up to indicate charging.
Note: The handset may become warm when the batteries are being
charged or during prolonged periods of use. This is normal and does not
indicate a fault.
To the
telephone
line socket
To the mains
power socket
