IDEC WindO/I-NV4, Руководство пользователя

Страница: 98 / 1738

4 Customizing WindO/I-NV4
2-66
WindO/I-NV4 User’s Manual
●
Save Tab
■ Save Project
■ AutoSave
Default file location: Specify the default save location of the project data.
Click Browse to display the Browse For Folder dialog box.
Save the following information every:
Specify the interval (5 to 60 minutes) for creating an AutoRecover file or Backup from a project
being edited.
This option can only be set when
AutoRecover file
or
Backup
is selected.
AutoRecover file: A project being edited is automatically saved as often as you want. The saved
AutoRecover file is used to recover the project if a power failure or otherwise
occurs that forces WindO/I-NV4 to quit. The AutoRecover file is automatically
deleted when the project is manually saved or WindO/I-NV4 exits. When the
AutoRecover file exists, the Project Recovery dialog box is displayed when
WindO/I-NV4 starts. For details, refer to “Project Recovery Dialog Box” on
page 2-40.
Backup: A backup copy of a project being edited is created as often as you want. The
file name of the backup is as follows:
Project Name
_
Backup Date
.pn4
Backup date format: YYYYMMDDhhmmss
(YYYY: year, MM: month, DD: day, hh: hour, mm: minute, ss: second)
Example: Project Name is "TEST01" at 4:56:07 on January 23, 2016
TEST01_20160123045607.pn4
If the project file has not been changed, a backup will not be created when
the interval specified in
Backup
elapses.
Backup file location:
Specify the save location of the backup file.
Click Browse to display the Browse For Folder dialog box.
This option can only be set when Backup is selected.
Display Warning Message when the number of files exceeds:
Select the maximum number of backup files from the following.
100
,
500
,
1000
When the specified number of files has been exceeded, a warning
message is displayed when WindO/I-NV4 starts.
This option can only be set when
Backup
is selected.