IDEC WindO/I-NV4, Руководство пользователя

Страница: 1385 / 1738

WindO/I-NV4 User’s Manual
26-15
3 Simulator
26
Sim
ula
to
r F
un
ctio
n
3.5 Script Debugger
You can check the operation of script configured in the project.
■ Script List
Displays the list of script used on the project.
■ Script Name
Displays the name of the script selected in the
Script List
.
■ Data Type
Displays the data type configured to the script selected in the
Script List
.
For details about the data type, refer to Chapter 20 “1.3 Data Type of the Script” on page 20-3.
■ Continue
Executes the script paused at the breakpoint up to the next breakpoint. If there is no next breakpoint, execute the
script to the end and exit.
■ Step Over
Executes the script while pausing each step (one line) at a time. If there is no next step, the script execution is
terminated.
(Script)
(Breakpoint)
Script ID: Displays the script ID (1 to 32000) of the registered scripts.
Script Name: Displays the script name of the registered scripts.
Debug: Selects whether or not to debug the script. Double clicking the cell switches between Enable
and Disable . The maximum number of scripts that can be configured to Enable is 16.
The keyboard shortcut is F5 key.
The keyboard shortcut is F6 key.