background image

2 Operational Check

3 Screen and Menu

4 Appendix

1 Overview

ii

Introduction

Terms of use

Software End User License Agreement 

Important

Carefully read the following license agreement. 
This agreement, regarding this software product (hereinafter called "this software") which you are in possession of, 
is a legal agreement that is concluded between the customer (individual or corporation) and the IDEC Corporation 
(hereinafter called "IDEC"). This software may include computer software and related media, printed materials  
(manuals and other documents) as well as "online" or electronic documents. By installing, copying or using this software, 
the customer is regarded to agree to the terms of this agreement. If you do not agree to the terms of this agreement, IDEC 
cannot grant the customer permission to install, use, or copy this software product. 

1. SCOPE

When the customer uses this software, the conditions of its application are as follows.

(1) 

GRANT. Without any charge, IDEC CORPORATION (IC) hereby grants to you a non-exclusive license to use its 
accompanying software product and accompanying documentation (Software).

(2) 

You may: copy the Software for archival purposes, provided any copy must contain all of the original Software's 
proprietary notices.

(3) 

You may not: copy the Software (except as specified above); rent, lease, sell, transfer or otherwise transfer rights 
to the Software; permit other individuals to use the Software except under the terms listed above; or remove any 
proprietary notices or labels on the Software.

(4) 

IDEC does not guarantee the absence of flaws, compatibility, operability, usability, and non-infringement of this 
software.  Additionally, IDEC bears absolutely no responsibility for any and all types of loss including loss of trust, 
suspension of operations, hardware failure, and all other commercial loss whether direct or indirect.

2. PROHIBITIONS

2.1.  You may not: permit other individuals to use the Software except under the terms listed above; modify, translate, 

reverse engineer, decompile, disassemble (except to the extent applicable laws specifically prohibit such restriction), 
or create derivative works based on the Software.

2.2.  Use of this software for profit-making purposes is forbidden. 
2.3.  The use of content for this software to conduct illegal or improper behavior is forbidden.
2.4.  EXPORT CONTROLS. None of the Software or underlying information or technology may be downloaded or 

otherwise exported or reexported (i) into (or to a national or resident of ) Iraq, Libya, North Korea, Iran or any other 
country to which the U.S. has embargoed goods; or (ii) to anyone on the U.S.Treasury Department's list of Specially 
Designated Nationals or the U.S. Commerce Department's Table of Deny Orders.

2.5.  In the event that the customer is in violation of this agreement or prohibited items resulting in damage to IDEC, 

IDEC can bill the user in question for compensation for damages and recovery measures, as well as confiscate this 
software and/or take any other actions deemed necessary. 

3. MISCELLANEOUS

3.1.  TITLE. Title, ownership rights, and intellectual property rights in and to the Software shall remain in IC and/or 

its suppliers. The Software is protected by the copyright laws of the United States and international copyright 
treaties. If you receive your first copy of the Software electronically, and a second copy on media, the second 
copy may be used for archival purposes only. Title, ownership rights, and intellectual property rights in and to the 
content accessed through the Software is the property of the applicable content owner and may be protected by 
applicable copyright or other law. This License gives you no rights to such content.

3.2.  Checking the environment in which this software will be installed and ensuring data retention through backup and 

other such actions are the sole responsibility of the customer.  

Содержание WB1F Support Tool








































Отзывы: