IDEC WB1F Support Tool, Руководство пользователя

Страница: 21 / 39

2 Operational Check Screen and Menu 4 Appendix 1 Overview
3-5
Menu item descriptions
z
Control commands
This screen is for transmitting control commands to the WB1F.
Actions can be executed such as barcode reading and turning the indicator LEDs on and off.
(1)
(2)
(3)
(4)
(5) (6) (7) (8) (9) (11) (12)
(13) (14) (15) (16) (17) (18) (19) (20)
(21) (22) (23)
(24)
(25)
(26)
(27)
(10)
No. Name Description
(1) Communication monitor
Displays communication requests and responses.
Blue text: request, Red text: response
(2) ASCII Sets the communication monitor to the ASCII display mode.
(3) HEX Sets the communication monitor to the hexadecimal display mode.
(4) Clear Clears the communication monitor.
(5) Start reading Starts reading barcodes.
(6) Stop reading Stops reading barcodes.
(7) OK out ON Turns on the OK output. (RS-232 type only)
(8) OK out OFF Turns off the OK output. (RS-232 type only)
(9) NG out ON Turns on the NG output. (RS-232 type only)
(10) NG out OFF Turns off the NG output. (RS-232 type only)
(11) PWM ON Success Turns on PWM output for when reading is successful. (RS-232 type only)
(12) PWM OFF Success Turns off PWM output for when reading is successful. (RS-232 type only)
(13) PWM ON Fail Turns on PWM output for when reading fails. (RS-232 type only)
(14) PWM OFF Fail Turns off PWM output for when reading fails. (RS-232 type only)
(15) Red LED ON Turns on the indicator LED (red). The illumination time follows the setting value.
(16) Red LED OFF Turns off the indicator LED (red).
(17) Orange LED ON
Turns on the indicator LED (orange). The illumination time follows the setting value.