IDEC WB1F Series, Руководство пользователя

Страница: 14 / 116

2. Installation & wiring 3. Functions 4. Support tool 5. Appendix Overview
1-2
Part names and functions
1. 2 Part names and functions
RS-232 Type USB Type
This section describes the names and functions of WB1F parts.
(4) Connecting cable
(1) Reading window
(2) Operation button
(3)Indicator LED
(Green)
(Orange)
(Red)
* The illustration is the WB1F-100S1B.
No. Name Function
(1) Reading window
The unit reads barcodes through the reading window.
While the unit is reading barcodes, the internal emitter LED turns on.
(2) Operation button
Use the operation button to turn on the barcode reading request and to switch the opera-
tion mode.
(3) Indicator LED
The indicator LED indicates the operating status of the unit.
(Green): Turns on when reading has succeeded and the read image is matched on comparison.
(Orange) : Turns on during a reading operation.
(Red): Turns on when reading fails and the read image is not matched on comparison.
This operation may differ due to the settings.
The status of the indicator LEDs also changes due to the unit's operating status.
(4) Connecting cable
RS-232 type
z
This type communicates via the RS-232 interface.
z
Performs control of OK output, NG output, and PWM output.
z
Judges the external trigger input status and turns the reading request on and off.
z
Connect to the power supply (5V DC).
USB type
z
This type communicates via the USB interface (USB virtual COM).