manualshive.com logo in svg

IDEC SmartAXIS Touch FT1A Series, Руководство пользователя

Поделиться
Скачать
IDEC SmartAXIS Touch FT1A Series Скачать руководство пользователя страница 795

SmartAXIS Touch User’s Manual

15-3

1 Overview

15

Ope
ration Log F

unction

1.2 Recorded Events

The recorded events are as follows.

■

Power ON

This operation is recorded when the Touch power is turned on.

■

Switch to Base Screen

This operation is recorded by the following events.

• Switched the Base Screen by pressing the Goto Screen Button or a Multi-Button
• Switched the Base Screen by pressing the key button 

Ref.

 on the Alarm List Display or the Alarm Log Display

• Switched the Base Screen by executing the Goto Screen Command or a Multi-Command
• Switched the Base Screen by writing a screen number to System Area 1 Display screen number (0)

■

Change Users

This operation is recorded by the following events.

• Switched the user by entering a password on the Password Screen
• Switched the user by writing a value of device
• Switched to the default user

■

Change Operation Modes

This operation is recorded by the following events.

• Switched to System Mode by pressing the Goto Screen Button or a Multi-Button
• Switched to System Mode by executing the Goto Screen Command or a Multi-Command
• Switched to System Mode by pressing 

System Mode

 on the Maintenance screen

• Switched to Run Mode from System Mode by pressing 

Run

 on the Top Page in the System Mode

• Switched to Monitor Mode from Run Mode by clicking 

Start Monitor

 on the WindO/I-NV3 

Online

 tab

• Switched to Run Mode from Monitor Mode by clicking 

Stop Monitor

 on the WindO/I-NV3 

Online

 tab

■

Press buttons

This operation is recorded by the following events.

• Pressing a Bit Button, Word Button, Goto Screen Button, Multi-Button, Selector Switch, Potentiometer, Numerical 

Input, Character Input

• Pressing the key buttons 

ENT

, 

Download Project

, 

Upload Project

, 

All Chk.

, 

Del. All

, 

Ref.

, 

Stop the Sound 

of the Buzzer and Screen flashing

■

Write Data to any Devices

This operation is recorded by the following event.
Writing a value to a device by pressing a Bit Button, Word Button, Multi-Button, Selector Switch, Potentiometer, 
Numerical Input, Character Input

• If User is selected in 

Default User

 in the User Accounts dialog box, a 

Change Users

 event occurs when 

the power is turned on and when the operation mode is changed.

• If  the 

Switch to Base Screen

 check box is selected, a 

Switch to Base Screen

 event also occurs when 

a 

Change Users

 event occurs.

The Operation Log is only recorded during Run Mode.
Switching from Run Mode to System Mode and switching from System Mode to Run Mode is recorded. 
Switching from System Mode to Data Transfer Mode and switching from Data Transfer Mode to System 
Mode is not recorded.

The Operation Log only records touch switch presses for parts created in WindO/I-NV3.
Operations for the following screens and buttons displayed in messages and title bars are not recorded.

• System  screen
• Password screen
• System error messages
• Popup screen title bar

Содержание SmartAXIS Touch FT1A Series

















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды