IDEC SE2L-H05LPC, Руководство пользователя

Страница: 37 / 152

SE2L User’s Manual (SE9Z-B1865)
36
When using muting override in dual protection mode, Muting 3, Muting 4, Override input 2 and Reset
input 2 are configured in the similar way.
3.10 Reference monitoring function
Reference monitoring is a function to monitor the displacement of the SE2L or the structure used as
reference boundary.
3.10.1 Area protection
An example of reference monitor function used for area protection is shown in figure 3-22. If reference
segments are configured on moveable objects (example: door) the OSSD will switch to OFF-state when the
door position is changed.
Figure 3-22 Top view of the area protection using reference monitor function
 When muting function is enabled, user must ensure the safety of the protection zone.
 Before using the muting function, user must perform risk assessment.
 A qualified person should configure the appropriate muting period according to the
requirement of the application. It is the user’s responsibility to properly perform the risk
assessment when configuring muting period to unlimited.
 Failing to comply with the above could lead to critical injury or death.
SE2L