IDEC microsmart pentra, Руководство по программированию

Страница: 323 / 344

FT1A S
MART
A
XIS
U
SER
’
S
M
ANUAL
FT9Y-B1382 26-5
26: D
ATA
L
OG
I
NSTRUCTIONS
CSV File Output Format and File Format Configuration
The CSV file output format is as follows. You can change the separating character for each data and the decimal symbol for
floating point numbers that are output to the CSV files on the Function Area Settings dialog box.

Output format
When the DLOG instruction is executed and the CSV file for the same date does not exist in the folder designated by S1, a new
CSV file is created and the header and the log data 1 are output as shown in above output format example. If the DLOG instruction
is executed again on the same date, the log data 2 is appended to the CSV file. Similarly, if the DLOG instruction is executed again
on the same date, log data 3 is appended to the CSV file.
When the date changes and the DLOG instruction is executed, a new CSV file with a new file name is created and the header and
the log data is output.
File format configuration procedure
1. From the WindLDR menu bar, select Configuration > Cartridges .
2. Under Data Log and Trace (CSV File Output) , configure the separating character and the decimal symbol.

The separating characters and the decimal symbols that are contained in the CSV file vary by country and region. You can
select the symbols to use from the following:

1. Separating character: "," (comma) or ";" semicolon

2. Decimal symbol: "." (period) or "," (comma)
3. Click the OK button to close the dialog box.
Time,D0010,D0020,D0030,D0050,D0060
2011/09/07 15:40:00,12345,1,5,12,111
2011/09/07 15:41:00,1212,3,7,35,222
2011/09/07 15:42:00,345,4,99,79,333
･
･
･
1.
2.