IDEC MICROSmart FC5A Series, Руководство пользователя

Страница: 39 / 343

3: M
OVE
I
NSTRUCTIONS
FC5A M
ICRO
S
MART
U
SER
’
S
M
ANUAL
FC9Y ‐ B1273 3 ‐ 13
NSET (N Data Set)
Applicable CPU Modules
Valid Devices
For the valid device address range, see pages 6 ‐ 1 and 6 ‐ 2
(
Basic Vol.).
Special internal relays cannot be designated as D1.
When T (timer) or C (counter) is used as S1, the timer/counter current value (TC or CC) is read out. When T (timer) or C (counter) is
used as D1, the data is written in as a preset value (TP or CP).
When F (float) data type is selected, only data register and constant can be designated as S1, and only data register can be designated
as D1.
When F (float) data type is selected and S1 does not comply with the normal floating ‐ point format, a user program execution error will
result, turning on special internal relay M8004 and ERR LED on the CPU module.
Make sure that the last destination data determined by D1+N ‐ 1 (word or integer data type) or D1+2N ‐ 2 (double ‐ word, long, or float
data type) is within the valid device range. If the derived destination device is out of the valid device range, a user program execution
error will result, turning on special internal relay M8004 and ERROR LED on the CPU module.
Valid Data Types
Example: NSET(F)
FC5A ‐ C10R2/C/D FC5A ‐ C16R2/C/D FC5A ‐ C24R2/C/D FC5A ‐ D16RK1/RS1 FC5A ‐ D32K3/S3 FC5A ‐ D12K1E/S1E
X X X X X X
Device Function I Q M R T C D Constant Repeat
S1 (Source 1) First device address to move X X X X X X X X —
D1 (Destination 1) First device address to move to — X X X X X — —
W (word) X
I (integer) X
D (double word) X
L (long) X
F (float) X
S1, S2, S3, ... , Sn

D1, D2, D3, ... , Dn
When input is on, N blocks of 16 ‐ or 32 ‐ bit data in devices designated
by S1, S2, S3, ... , Sn are moved to N blocks of destinations, starting
with device designated by D1.
This instruction is available on upgraded CPU modules with system pro ‐
gram version 200 or higher.
NSET(*) S1
*****
S2
*****
Sn
*****
.....
D1
*****
First 16 ‐ /32 ‐ bit data S1
Second 16 ‐ /32 ‐ bit data S2
Third 16 ‐ /32 ‐ bit data S3
Nth 16 ‐ /32 ‐ bit data Sn
N blocks of 16 ‐ /32 ‐ bit data
First 16 ‐ /32 ‐ bit data D1
Second 16 ‐ /32 ‐ bit data D1+1 or D1+2
Third 16 ‐ /32 ‐ bit data D1+2 or D1+4
Nth 16 ‐ /32 ‐ bit data D1+N–1 or D1+2N–2
N blocks of 16 ‐ /32 ‐ bit data
N Data Set
When a bit device such as I (input), Q (output), M (internal relay), or R (shift register) is designated as
the source or destination, 16 points (word or integer data type) or 32 points (double ‐ word or long data
type) are used.
When a word device such as T (timer), C (counter), or D (data register) is designated as the source or
destination, 1 point (word or integer data type) or 2 points (double ‐ word, long, or float data type) are
used.
D1
D20
Five constants 0.51, 2.34, 7.89, 3.33, and 10.0

D20 through D29
When input I0 is turned on, 5 constants designated by source devices S1 through S5 are
moved to 10 data registers starting with D20 designated by destination device D1.
2.34
0.51
7.89
S1
0.51
S4
3.33
I0
NSET(F)
3.33
10.0
2.34
D22 ∙ D23
0.51 D20 ∙ D21
7.89
D24 ∙ D25
3.33 D26 ∙ D27
10.0 D28 ∙ D29
S2
2.34
S3
7.89
S5
10.0
SOTU