IDEC MICROSmart FC5A Series, Руководство пользователя

Страница: 278 / 343

24: AS ‐ I
NTERFACE
M
ASTER
C
OMMUNICATION
24 ‐ 6 FC5A M
ICRO
S
MART
U
SER
’
S
M
ANUAL
FC9Y ‐ B1273
Operation Basics
This section describes simple operating procedures for the basic AS ‐ Interface system from programming WindLDR on a
computer to monitoring the slave operation.
AS ‐ Interface System Setup
The sample AS ‐ Interface system consists of the following devices:
AS ‐ Interface Cable Wiring
Before wiring the AS ‐ Interface cable, remove the AS ‐ Interface cable terminal block from the AS ‐ Interface cable connector
on the AS ‐ Interface master module.
AS ‐ Interface specifies use of brown cables for the AS ‐ Interface + line, and blue cables for the AS ‐ Interface – line. Connect
the cables to match the color labels on the terminal block. Tighten the terminal screws to a torque of 0.5 to 0.6 N ∙ m.
Insert the terminal block to the connector on the AS ‐ Interface master module, and tighten the mounting screws to a
torque of 0.3 to 0.5 N ∙ m.
Name Type No. Description
FC5A MicroSmart Slim Type CPU Module FC5A ‐ D16RK1 —
MicroSmart AS ‐ Interface Master Module FC4A ‐ AS62M —
WindLDR FC9Y ‐ LP2CDW Version 5.0 or higher
AS ‐ Interface Standard Slave —
1 unit
Address 0
ID: 0, I/O: 7, ID2: F, ID1: 7
AS ‐ Interface Power Supply PS2R ‐ Q30ABL Output 30.5V DC, 2.4A (73W)
Slim Type CPU Module
FC5A ‐ D16RK1
AS ‐ Interface Master Module
FC4A ‐ AS62M
Standard
AS ‐ Interface Cable
Computer Link Cable 4C
FC2A ‐ KC4C
3m (9.84 ft.) long
AS ‐ Interface Power Supply
Standard Slave
Address 0
ID: 0, I/O: 7, ID2: F, ID1: 7
Blue AS ‐ Interface –
Use a ferrule.
Brown AS ‐ Interface +
Use a ferrule. Blue Label
Brown Label