IDEC MICRO/I HG4G-CJT22 F-B Series, Руководство пользователя, Страница: 727 / 1665

WindO/I-NV4 User’s Manual
10-121
6 Message Switching Display
10
Data Displa
ys
●
Message Tab
■
Use Text Manager
Select this check box to use text registered in Text Manager.
■
Settings
Edits the message settings.
No.: Shows the message number (Msg number).
The number of messages that can be registered varies based on
Switching Method on the
General tab.
Bit Number: Msg0 to Msg15
Value: Msg0 to Msg999
Message: Enter the text to display.
Double clicking the cell allows to edit the Message. The maximum number is 3750 characters. You
can enter multi-line messages by inserting a newline.
The characters that can be entered vary based on the font selected for
Font on the Format tab. For
details, refer to Chapter 2 “1.2 Available Text” on page 2-6.
This option can only be configured if the
Use Text Manager check box is cleared.
• To display the backslash (
\
), enter a backslash (
\
) before the backslash (
\
).
• A line feed is added with pressing and holding ALT and ENTER keys.
Change: Selects whether or not to configure Text and Plate per Msg number. For N , the colors are
configured by Text Color on the Format tab and Plate Color on the View tab.
Double clicking the cell toggles between Y as Yes and N as No.
Text: Selects the text color for the messages when configuring the text color per Msg number (color: 256
colors, monochrome: 16 shades).
Double clicking the cell displays the Color Palette where you can change the Text Color.
Plate: Selects the plate color for the messages when configuring the plate color per Msg number
(color: 256 colors, monochrome: 16 shades).
Double clicking the cell displays the Color Palette where you can change the Plate Color.