1 KW2D Series Smart RFID Reader Statuses and Operations
KW2D Series Smart RFID Reader User’s Manual
5-3
5
Fu
nc
tio
ns
a
nd
S
ettin
gs
1.2 Detection Mode
The buzzer sound, LED display, and the status of the KW2D Smart RFID Reader in the detection mode are as follows.
●
Detecting an RFID tag
When an RFID tag at the distance set in Reading Distance under the
Tag Read Settings
on the
RFID Reader
Settings
tab is detected, the KW2D Smart RFID Reader waits for the tag information of the detected tag to be read.
KEYFOB type
Card type
Buzzer
LED
Status
None
The LEDs (white) are ON.
Detects RFID tag and waits for tag information to be read.
•
RFID tags are not detected if two or more tags are held up to the RFID reader.
•
The above card type illustration is an example of the LED indicators at the time of detection, and does not
explain or guarantee the detection position of the RFID tag.
•
The time required to complete reading the tag information of the detected RFID tag can be set in Reading
Distance and Reading Time under the
Tag Read Settings
on the
RFID Reader Settings
tab. For details,
refer to "1.4 Adjusting the RFID Tag Detection Sensitivity" on page 5-9.
LED (white)
LED (white)
LED (white)
LED (white)
LED (white)
LED (white)
LED (white)
LED（白）
