IDEC KW2D Series, Руководство пользователя

Страница: 109 / 129

2 Configuration and Functions
KW2D Series Smart RFID Reader User’s Manual
6-13
6
KW
R
FID
C
on
fig
ura
to
r
■ Use Buzzer
Select this check box to sound the buzzer according to the operation of the KW2D Series Smart RFID Reader.
■ Use LED
Select this check box to turn on or flash the LEDs according to the operation of the KW2D Series Smart RFID Reader.
●
Tag List
Tab
This tab is used to batch manage the tags used with the KW2D Series Smart RFID Reader on the tag list.
The
Tag List
tab is common regardless of the Communication Mode (ModbusTCP Server, EtherNet/IP Adapter, CC-
Link IE Field Basic Slave, Event Transmission) selected in
Connection Settings
on the
RFID Reader Settings
tab.
■ Enable/Disable
Select this check box to enable the RFID tag.
■ UID
Enter the UID of the RFID tag. The UID can be entered up to 20 digits only with characters that can be used as
hexadecimal digits.
If the number of digits is odd, "0" is added to the end of the UID to make the number of digits even.
■ Name1, Name2
Enter any name freely. The maximum length is 18 bytes.
The character encoding set for Character Code of Tag List on the Project Property dialog box is used. If there are
characters that cannot be converted, those characters are displayed as "?". For details, refer to "3.5 Changing Project
Properties" on page 6-16.
When the power is turned on or restarted, the buzzer operates even if the Use Buzzer check box on the RFID
Reader Settings tab is cleared.
When the power is turned on or restarted, the LED operates even if the
Use LED
check box on the RFID
Reader Settings tab is cleared.
All RFID tag settings are downloaded to the KW2D Series Smart RFID Reader regardless of the status of the
Enable/Disable check boxes.
Be careful not to enter duplicate UIDs. If you enter a UID that is already registered, an error message is
displayed and that UID cannot be registered.