HS1E Series
Safety Products
B1-30
www.idec.com
USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC
B1
Safety Products
HS1E
Key features include:
• Basic unit and solenoid unit in one housing
• Plastic Housing: Light weight
• Ease of Wiring: All the terminal screws are M3.5.
• Available with a red or green indicator
• Choose from 4 circuit configurations
• When mounting the key on a movable door, and the switch on a machine body, the door can be
mechanically locked when closed.
• Greater Safety: The door is unlocked by a solenoid lock-release signal from a PLC or other source
after the machine has stopped.
• In the event of power failure or for machine maintenance, the door can be unlocked using a special
tool.
• Flexible Installation: The key can be accessed from two directions.
• Also available is a manual unlock key type.
HS1E Series Full Size Interlock Switch with Locking Solenoid
Direct Opening Action
GS-ET-15
BG standard in Germany
EN1088
EN60947-5-1
IEC60947-5-1
Double Insulation
Certificate No.
2005010305145656
HS1E Series Functionality
Conduit Port: G1/2
Contact Mechanism
(Direct Opening Action)
LED Indicator
Terminal Block (M3.5)
L-shaped Key
(mainly for hinged doors)
Terminal Block for the
Indicator (M3.5)
Straight Key
(mainly for sliding
doors)
Two Key Entry Slots
Key wrench for TORX*
screws (included with
the switch)
TORX* screw
*TORX is a registered trademark of Camcar Textron.
Adjustable Key
(mainly for hinged doors)
