IDEC HR6S-DN, Инструкция по эксплуатации, Страница: 67 / 103

Functions
HR9Z-B2200 8/2020
67
Application Function 5
Wiring of the inputs for sensors/devices with two PNP outputs
Characteristic Value/Description
Typical applications Monitoring of proximity switches
Type of outputs of sensor/device providing the input signal
for application function
Two PNP outputs
S## terminals to be connected S12 and S13 for sensor/device A
S22 and S23 for sensor/device B
S32 and S33 for sensor/device C
S42 and S43 for sensor/device D
S52 and S53 for sensor/device E
S62 and S63 for sensor/device F
If less than 6 safety-related inputs are used, the terminals
S#1, S#2 and S#3 of the unused safety-related inputs
must be bridged (example: sensor/device F not
connected: S61, S62 and S63 bridged).
Do not configure a start function with startup test if less
than 6 safety-related inputs are used.
Dynamization No
Signal interlock monitoring Between terminals S12 and S13
Between terminals S22 and S23
Between terminals S32 and S33
Between terminals S42 and S43
Between terminals S52 and S53
Between terminals S62 and S63
Synchronization of safety-related inputs No