IDEC HR6S-DN, Инструкция по эксплуатации, Страница: 65 / 103

Functions
HR9Z-B2200 8/2020
65
Application Function 4
Synchronization:
Characteristic Value/Description
Typical applications Monitoring of guards as per ISO 14119/14120
with electrical switches
Monitoring of guards as per ISO 14119/14120
with coded magnetic switches
Monitoring of proximity switches
Type of outputs of sensor/device providing the input signal
for application function
Normally open, normally closed and/or changeover
outputs
S## terminals to be connected S11-S12 and S11-S13 for sensor/device A
S21-S22 and S21-S23 for sensor/device B
S31-S32 and S31-S33 for sensor/device C
S41-S42 and S41-S43 for sensor/device D
S51-S52 and S51-S53 for sensor/device E
S61-S62 and S61-S63 for sensor/device F
If less than 6 safety-related inputs are used, the terminals
S#1 and S#3 of the unused safety-related inputs must be
bridged (example: sensor/device F not connected: S61
and S63 bridged).
Do not configure a start function with startup test if less
than 6 safety-related inputs are used.
Dynamization Yes
Signal interlock monitoring No
Synchronized terminals Synchronization time
S12 synchronized with S13 S12 and S13 have to be activated within 2.2 s.
S22 synchronized with S23 S22 and S23 have to be activated within 2.2 s.
S32 synchronized with S33 S32 and S33 have to be activated within 2.2 s.
S42 synchronized with S43 S42 and S43 have to be activated within 2.2 s.
S52 synchronized with S53 S52 and S53 have to be activated within 2.2 s.
S62 synchronized with S63 S62 and S63 have to be activated within 2.2 s.