TD04
TD04
TD04-16126-700
INSTRUCTION MANUAL
INDUSTRIAL BLENDER - TD04-16126-700
* Please read these instructions carefully before operation this appliance.
IMPORTANT SAFEGUARDS
When using electrical appliances, basics safety precautions should always be observed
including the following:
- Before connecting your blender check if voltage of your power system
corresponds to the same specified on the appliance.
- To protect against risk of electrical shock, do not put cord, plug, base or
motor in water or other liquids.
- Never connect two or more appliances in the same plug.
- When not in use, unplug the blender.
- Avoid starting blender empty.
- Avoid contact with moving parts because blades are sharp. Handle carefully.
- Keep hands and utensils out of container while blending to prevent the
possibility of severe personal injury and or damage to blender. A plastic spatula may be
used but only when blender is "NOT RUNNING".
- Only remove the container when blender "COMPLETELY STOPPED".
INSTRUCTIONS FOR USE
- Blender control is made by switch ( ON - OFF)
- It is recommended to cut food in small pieces and maintain food below frieze
height to avoid spilling.
- To start blender place small quantity of food before connecting it, and afterwards complete
container.
- When blender is running do not remove the lid.
- If blender action stops, turn blender off. Remove lid and use a plastic spatula
to push mixture toward blades. Replace lid and continue.
CLEANING PROCEDURE
- Clean container (cup) with liquid soap and water filling to half capacity.
- Turn on blender for some seconds.
- Turn off blender, empty the container and rinse it.
- Unplug blender clean body and external cup with a wet cloth.
- Do not use harsh detergent or chemical products for cleaning.
- Never use water jet or immerse appliance in water.
- Wipe off appliance switch using a dry cloth and wait at least half an hour before re-
conneting to the main power outlet.
T
h
e
p
ic
tu
re
s/
d
ra
w
in
g
s
ar
e
ill
u
st
ra
ti
o
n
s.
A
ll
d
at
a
ca
n
b
e
ch
an
g
ed
w
it
h
o
u
t
n
o
ti
fi
ca
ti
o
n
.
CROYDONMAQ INDUSTRIAL LTDA.
Estrada São Lourenço, 891 - Capivari
Duque de Caxias - RJ / Brasil - CEP 25243-150
Phone: 55 21 2777- 8100 / 55 21 2777-8106
e-mail: [email protected] - www.croydon.com.br
