1. CONNECTOR RATINGS
2. TOOLING CHART
3. REDUCING BUSHING
SBE
®
& SBX
®
Connectors
Assembly instruction for SBE160, SBE320, SBX175 and SBX350 Series
two pole battery connectors with option for auxiliary contacts.
FOR INSTALLATION BY A QUALIFIED ELECTRICIAN IN
ACCOR
DANCE WITH NATIONAL AND LOCAL ELECTRICAL CODES
AND THE FOLLOWING INSTRUCTIONS. THE SUITABILITY OF THIS
TYPE OF TERMINATION MUST BE EVALUATED BY UNDERWRITERS’
LABORATORIES, INC. AND CANADIAN STANDARDS. ASSOCIATION
FOR THE END USE APPLICATION: Assemble contacts to the cables
according to the equipment manufacturer’s assembly instructions. The
following instructions are supplied as a reference. Please note: instruc-
tions are included with each crimp tool for proper use.
CAUTION: When using cable with jacket diameter less
than 0.423 inches (11mm) on the SBE160 / SBX175 and
less than 0.709 inches (18mm) on the SBE320 / SBX350
thin wall heat shrink insulation should be evenly applied
across the cable and contact barrel junction to insure
finger protection.
Contains one (1) housing and two (2) contacts.
Max Cable Size
Series Amperes Volts AWG mm²
SBE160 160
150 1/0
50
SBE320 320
150 300mcm 150
SBX175 175
600 1/0
50
SBX350 350
600 300mcm 150
Bushing
Wire Size
For Use With
Part Number AWG (mm²) SBE160 / SBX175 SBE320 / SBX350
5687
#1 (42.4)
6384G1 contact
6354 c 5918 bushing
5690
#2 (33.6)
6384G1 contact
6354 c 5918 bushing
5693
#4 (21.2)
6384G1 contact
6354 c 5918 bushing
5663
#6 (13.3)
6384G1 contact
6354 c 5918 bushing
5648
#10 (5.3)
6384G1 contact
6354 c 5918 bushing
5920
N/A (16)
6384G2 contact
6394 contact
5918
1/0 (53.5)
N/A
6354 contact
Contact
Wire
Pneumatic
Dieless
Part Number Size
Bench Tool + Die + Locator or Hydraulic Tool
6384G2
35 mm²
1387G1
1388G3 1389G3
6384G1
1/0 AWG
1387G2
1303G2 1304G2
6354
2/0 AWG
1387G1
1388G2 1389G2
6354
2/0 AWG
1387G2
1303G12 1304G28
6355
3/0 AWG
TBD
TBD
TBD
6356
4/0 AWG
TBD
TBD
TBD
6358
300 MCM
TBD
TBD
TBD
1341G1
50 mm²
1387G2
1303G8 1304G27
1341G2
70 mm²
1387G2
1303G7 1304G27
1341G3
95 mm²
TBD
TBD
TBD
HEAT SHRINK INSULATION SPECIFICATIONS
Connector Nominal
Minimum Maximum
Series
Tubing Size
Length
Wall Thickness
SBE320 / SBX350
0.75 in (19mm)
2.0 in (51mm) 0.030 in (.76mm)
SBE160 / SBX175
0.50 in (12.7mm)
2.0 in (51mm) 0.025 in (.63mm)
1368
1368
1368
1368
1368
1368
1368
1368
1368
1368
[19.0] 0.75 MIN
[3.2] 0.12 MIN
[3.2] 0.12 MIN
