Results of testing a good coax cable, No.5 (Green) Coax Terminator
being used; screen displays as:
1. “PASS” shown on the first line and Coax
(RJ45) mode also shown on first line;
2. On the third line, the remote number and
color code are displayed;
3. When a Remote Terminator is
connected, no length information
will be displayed on the screen.
(when measuring the length of a
coax cable, no remote should be
used, see screen#L-10 of LENGTH
mode)
Results of testing a coax cable without a F-Connector Terminator
attached; screen displays as:
1. “FAIL” shown on the first line and the
Coax (RJ-45) mode;
2. On the third line, “Open” is shown
Note: the eight specially numbered and
color-coded F-Connector Terminators
must be used in conjunction with Coax
cable test mode.
Results of testing a shorted cox cable; screen displays as:
1. “FAIL” shown on the first line and the
Coax (RJ-45) mode;
2. On the third line, “Short” is displayed;
LENGTH Mode - Description (1)
• Measuring cable length by measuring its capacitance and using the capacitance
per unit of length (length constant) to calculate the length.
• Connect cable to the Main unit (with or without the presence of a Remote at
the other end).
• Press any key to turn on the Tester, press MODE, scroll through and select
LENGTH mode, press SELECT key to enter (see Screen #L-1)
• Use Up and Down arrow keys to select type of cable (M12- 2 pair
data cable, M12>RJ45 for M12 to RJ45 cable, RJ45 for 4-pair data
cable or Coax (RJ45) for coaxial cable) to test (see screen #L-2),
press SELECT to proceed with cable length measure.
Pass
COAX (RJ45)
5 Green
Connect one end of the cable to the main
unit by means of a RJ-45 plug to Coax
Adapter and any one of the eight color
coded
Coax Terminators
must be
attached on the other end to perform test.
Fail
COAX (RJ45)
Open
Fail
COAX (RJ45)
Short
9
PK Elektronik Vertriebs GmbH, E-Mail: [email protected], Internet: www.pkelektronik.com
