manualshive.com logo in svg

IDEAL INDUSTRIES OTDR, Техническое руководство, Страница: 30 / 123

Поделиться
Скачать
IDEAL INDUSTRIES OTDR Скачать руководство пользователя страница 30

Setting Up Your OTDR

22

IDEAL

Cleaning and Connecting Optical Fibers

Cleaning and Connecting Optical Fibers

To connect the fiber-optic cable to the port:
1.

Carefully align the connector and port to prevent the fiber end from 
touching the outside of the port or rubbing against other surfaces.

If your connector features a key, ensure that it is fully fitted into the 
port’s corresponding notch.

2.

Push the connector in so that the fiber-optic cable is firmly in place, 
thus ensuring adequate contact.

If your connector features a screwsleeve, tighten the connector 
enough to firmly maintain the fiber in place. Do not overtighten, as this 
will damage the fiber and the port.

Note:

If your fiber-optic cable is not properly aligned and/or connected, you will 
notice heavy loss and reflection.

I

MPORTANT

To ensure maximum power and to avoid erroneous readings:

³

Always clean fiber ends as explained below before inserting 
them into the port. IDEAL is not responsible for damage or 
errors caused by bad fiber cleaning or handling.

³

Ensure that your patchcord has appropriate connectors. Joining 
mismatched connectors will damage the ferrules.

Содержание OTDR




























































































































Отзывы:

Нет отзывов