Страница 1: ......
Страница 2: ...hat the replacement cylinder is the correct one for the installation b Extinguish any fire flame our source of ignition including cigarettes pipes and pilot lights before changing the gas cylinder c Change cylinders with caution d Ensure that the gas cylinder valve s is are closed before disconnecting an empty cylinder or before removing any plastic cap or plug on the outlet connection of the repl...
Страница 3: ...s lit press in the Lockout reset button 5 If the lockout condition persists consult a CORGI registered installer LEGEND 1 Thermostat knob 2 Mains gas inlet cock 3 Overheat thermostat button 4 Lockout light 5 Lockout reset button 6 Burner on light 7 Overheat light 2 TO SHUT DOWN THE BOILER For short periods Turn the boiler off at the time clock or system controls Wait for 6 minutes and then turn th...
Страница 4: ...f leakage cannot be stopped REMOVE CYLINDERS to a safe place in the open air and advise the supplier If this is not possible evacuate the premises and call the fire brigade Do not use the installation until it has been checked by a CORGI registered installer EMERGENCY ACTION FIRE IMMEDIATE ACTION IF SAFE TO DO SO SHUT OF GAS SUPPLY Do not attempt to extinguish the flames by any other means Raise t...
