background image

REVISION DATE

20180411

DOCUMENT NUMBER

TERMS OF USE:

 Automotive Data Solutions Inc. (“ADS”) products are strictly intended for installation by 

Certified Technicians who are employed by a registered business specialized in the installation of auto-

motive aftermarket electronics products. Prior to beginning installation of an ADS product in a vehicle, 

it is the Certified Technician’s responsibility to review the most current Product Guide, Install Guide 

and vehicle-specific notes available in Weblink®. ADS is not responsible for any damages whatsoever, 

including but not limited to any consequential damages, incidental damages, damages for loss of time, 

loss of earnings, loss of profit, commercial loss, loss of economic opportunity and the like that may or 

may not have resulted from the use, misuse, improper installation or operation of its products. ADS 

reserves itself the right to suspend any Weblink® account without notice and decline to offer technical 

support to non-Certified Technicians, non-compliant Certified Technicians or end users.

BEFORE INSTALLATION

1- Connect module to computer

2- Login to Weblink account

3- Flash firmware to module (module is not preloaded with firmware)

4- Use accessories accordingly (accessories are sold separately)

U.S. Patent No. 8,856,780

INSTALL GUIDE

IDL-CH(RS)-CH4-[CMCHXA0]-EN

HARDWARE

CMCHXA0

ACCESSORIES

ADS-USB (REQUIRED)

COMPATIBLE RF-KIT (OPTIONAL) 

DIRECTED SMARTSTART & ADS-HRN(RS)-SM01 (OPTIONAL) 

 

FIRMWARE

IDL-CH(RS)-CH4-[CMCHXA0]

www.idatastart.com

Automotive Data Solutions Inc. © 2018

49571

Содержание CMCHXA0





















Отзывы: