7
FCC Regulatory Compliance:
Notices: Class B Equipment
This equipment has been tested and found to comply with the limits for a Class B
digital device pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. This device complies with part
15 of the FCC rules. Operation is subject to two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications to the VP4880, VP4880C, or VP4880E not
expressly approved by ID TECH could void the user's authority to operate
the device.
Other Agency Approvals and Compliances
CE (EN55022/EN55024, Class- B)
FCC (Part 15, Class-B)
RoHS (DIRECTIVE 2011/65/EU)
of the constraint of Li-Battery
specification.
Storage Temperature -20 °C to 60
°C
1. Non-condensing.
2. Product storage temperature is
limited to the range for the reason
of the constraint of Li-Battery
specification.
Operating Humidity
5% to 95%
Non-condensing
Storage Humidity
5% to 95%
Non-condensing
