Time Controller Series User Manual
Section 4: Getting Started
ID QUANTIQUE SA
1227 Geneva
T +41 22 301 83 71
21
Rue Eugène-Marziano 25
Switzerland
F +41 22 301 83 79
4
Getting Started
4.1
Preparing the Time Controller for Use
Step 1
Familiarize yourself with the handling and safety precautions, and ensure they are
followed in the course of setting up, operating, and storing the unit (see Section 2
–
”).
Step 2
Remove the Time Controller from its packaging. Ensure you have possession of the
Time Controller unit, as well as the necessary supplied accessories (see Section 3.1.5
–
).
Step 3
Ensure you have a host computer capable of operating the device (see Section 3.1.4
–
)
Step 4
Ensure that the area of use meets the electrical and environmental requirements (see
Sections 3.1.2
–
and 3.1.3
–
).
Step 5
Safely install the Time Controller unit (follow the steps in Section 4.2
–
).
Step 6
Install the software required for the host computer to operate the Time Controller
(follow the steps in Section 4.3.1
–
).
Step 7
Update the Time Controller firmware (follow the steps in Section 4.3.2
–
).