Id Quantique SWISS QUANTUM+ Time Controller Series, Руководство пользователя, Страница: 19 / 92

Time Controller Series User Manual
Section 3: System Overview
ID QUANTIQUE SA
1227 Geneva T +41 22 301 83 71 info@idquantique.com
19
Rue Eugène-Marziano 25 Switzerland F +41 22 301 83 79 www.idquantique.com
3.2 Time Controller License
The Time Controller is delivered with a license file pre-installed, selected during the sales process.
You can find the exact license you have installed
by navigating to the ‘ Time Controller Application
Mode’ page with the Time Controller device connected (see Step 4 of Section 4.3.2 –
“ Time Controller Firmware ”) .
The Time Controller device comes with three license options, with optional extras, as follows:
1. TCSPC – Access to time-correlation measurements with the five input channels in ‘high
speed’ mode only (>100 MHz max count rate per channel), with the optional extras:
Option a. HR – Access to ‘high resolution’ mode
ID1000 : 1 ps resolution and 4 ps rms jitter for all five input channels
ID900 : 13 ps resolution, 5.7 ps rms jitter for input channels 1 to 4 only
Option b. PG – Access to the internal FPGA logic, to configure real-time selection filters
for up to four-fold coincidences
Option c. 4OUT – Access to the four output channels and the internal delay / pulse
generator functionality
2. Master – Access to time-correlation measurements with the 5 input channels in ‘high speed’
mode (>100 MHz per channel), access to the 4 output channels and the internal delay /
pulse generator functionality, access to the internal FPGA logic, with the optional extra:
Option a. HR – Access to ‘high resolution’ mode
ID1000 : 1 ps resolution and 4 ps rms jitter for all five input channels
ID900 : 13 ps resolution, 5.7 ps rms jitter for input channels 1 to 4 only
License Upgrade : if you would like to upgrade the license of your Time Controller at any
time, please contact ID Quantique at support@idquantique.com for further support.