ID-AL - My Music Player and My Music Player LE - User Guide V1.0
9. Programming the Player
This chapter explains how to configure the player and to program the playback. These procedures can be
performed from the several interfaces listed below. For more information about each interface, please refer to
the pertaining chapters.
•
From the front panel user interface:
◦
“Advanced” menu with a long press on the knob (≥ 5 s).
Please refer to Front Panel User Interface (page 67).
•
From a web browser:
1. Connect to the player with the HTTP address of the player,
http://
and the player network
address (e.g.
http://mmp-8b0a
or
http://192.168.0.104
). To know the player network
address, please refer to Identify the player on the network of Ethernet Network Connection (page
50).
2. Click on
Log In
and enter the username and the password of the embedded web server (user
or administrator).
•
Default administrator account: username =
admin
, password =
admin
.
3. Click on the section that refers to the function to be configured.
Please refer to Ethernet Network Connection (page 49) and Web server (page 73).
•
From the configuration file (
system.ini
): please refer to Settings of the Parameters with
“system.ini” File (page 62).
9.1. Playback at the Startup (Autoplay)
. Introduction
•
The AUTOPLAY function allows to play a specific audio source at each startup of the player. The
audio sources playback is described in Playback of the Audio Files, Web radios and Other Audio
Sources (page24). Here is the list of possible settings:
-31-
© 2017, Waves System