4-1
4-3
4-2
4-5
4-6
OPTIONAL: Installing Drive ID Plugs
1
1
Drive ID Plug
To install drive ID plugs, gently twist off the plug from
the Drive ID Plugs mold and insert it into the drive ID
plug slot in-front of the tray
To secure ODD device, tighten the screw
on the front panel.
Remove the ODD bracket from the device.
Slim ODD
Ultra Slim ODD
M2*2.5 pan head Screw
To secure (ultra) slim ODD onto the bracket,
use two M2*2.5 pan head screws to secure
onto the ODD bracket.
4-4
スリムタイプ
ODD
デ
Installation de lecteur Ultra Slim ODD / Slim ODD
Laufwerk installieren Installation de lecteur de disque optique ultrafin
9.5mm
/ 12.7mm
超薄型
/
薄型光碟機安裝步驟
バイスの取付手順
笔记本光驱安装步骤
Ultra Slim / Slim ODD Installation
Optisches Ultra Slim / Slim
4
1. Place the ODD spacer installation guide on top
of Ultra Slim ODD (as shown in the picture).
2. Follow the ODD spacer installation guide and then
attach the EVA foam on the Ultra Slim ODD.
1
2
Please paste the
EVA foam spacer along the arrow po
inted edge,
and avoid paste onto the front facepl
ate of ODD
Please paste the E
VA foam spacer
along the arrow
pointed edge,
and avoid paste
onto the front faceplate
of ODD
Use the provided ODD spacer installation guide
to correctly install the EVA foam spacer on top
of the Ultra Slim ODD
Slim ODD
To remove the ODD dust cover, push
the unlatch tab to the right.
Push
Remove the ODD bracket by unscrewing
a single screw on the front of the bracket.
Optional: Ultra Slim ODD spacer installation
