Technical Specifications
The following specifications are important and vital to the correct operation of this product. Failure to adhere to
the specifications will result in any warranty or guarantee that was provided becoming null and void.
Ordering Information
PRT-IVO-IF
Protege Inovonics Wireless Receiver Module (for use in the US, AU, NZ)
PRT-IVO-IF-EU
Protege Inovonics Wireless Receiver Module (for use in the EU region)
Power Supply
Operating Voltage
11-14V DC
Operating Current
160mA @ 13.0V DC (Typical)
Communication
RS-485
Module Network
Ethernet
1 10/100Mbps Ethernet Communication Link
Operating Frequencies
902-928 MHz (US)
915-928 MHz (AUS)
922-928 MHz (NZ)
868-870 MHz (EU)
Outputs
Relay Output
1 Form C Relay - 7A 250V Max resistive
Dimensions
Dimensions (L x W x H)
162.0mm x 91.4mm x 27.9mm (6.38 x 3.60 x 1.10")
Weight
180.2g (6.4oz)
Operating Conditions
Operating Temperature
-10° to 55°C (14° to 131°F)
Storage Temperature
-10˚ to 85˚C (14˚ to 185˚F)
Humidity
0%-93% non-condensing, indoor use only (relative humidity)
It is important that the unit is installed in a dry cool location that is not affected by humidity. Do not locate the unit
in air conditioning or a boiler room that can exceed the temperature or humidity specifications.
Integrated Control Technology continually strives to increase the performance of its products. As a result these
specifications may change without notice. We recommend consulting our website (www.ict.co) for the latest
documentation and product information.
PRT-IVO-IF | Protege Inovonics Wireless Receiver Module | Installation Manual
28
