![background image](http://html1.mh-extra.com/html/ict/protege-prt-ipic-poe-c/protege-prt-ipic-poe-c_installation-manual_3541014049.webp)
Technical Specifications
The following specifications are important and vital to the correct operation of this product. Failure to adhere to
the specifications will result in any warranty or guarantee that was provided becoming null and void.
Ordering Information
PRT-IPIC-POE-C
Protege Vandal Resistant VoIP Intercom with Camera
ACC-IPIC-C-FMB
Optional Flush Mount Kit with Decor Frame and Brick Box
Power Supply
Operating Voltage
12VDC (9 -16VDC)
Operating Current
1A
Power over Ethernet
IEEE 802.3af Class 3
Communication
Communication protocol
SIP 2.0(RFC-3261)
Speech flow
Protocols
RTP/SRTP
Decoding
G.722 G.711U G.711A G.723.1 G.726-32 G.729AB Codecs
Audio Amplifier
3W
Volume Control
Adjustable
Full duplex
speakerphone
Support (AEC)
Port
Recording output
One (3.5mm terminal block)
Short circuit input
One (3.5mm terminal block)
Short circuit output
One Form C relay (3.5mm terminal block) 24V DC 1A
WAN port
10/100BASE-TX s Auto-MDIX, RJ-45
Cables
CAT5 or better
Camera
Resolution
960p (1280x960 pixels)
Viewing Angle
115° horizontal / 87° vertical
Frame Rate
30 fps
Audio
Microphone
Omnidirectional
Speaker
TY 4 ohm 3W
Dimensions
Wall-Mounted
223 x 130 x 74mm (8.77 x 5.11 x 2.91")
In-Wall
270 x 150 x 61mm (10.6 x 5.9 x 2.4")
Weight
960g (33.86oz)
Environment
PRT-IPIC-POE-C | Vandal Resistant VoIP Intercom with Camera | Installation Manual
49