ICT EliteSuite ELT-KLES, Руководство пользователя

Страница: 19 / 28

ELT-KLES EliteSuite Eclipse LED Keypad User Manual | February 2014
19
Special Features
The EliteSuite System offers many unique features.
Alarm Memory
All zones that generate an alarm will be stored in the memory of the EliteSuite Security System. If an alarm has
occurred on your system the device will show this by flashing the ARM LED once every 2.5 seconds.
Viewing Alarm Memory
1. Press the FNC key then press and hold the MEMORY key (3) for two seconds or press the FNC key then
press the MEMORY key (3) and enter your [USER CODE].
Zones which generated an alarm will be displayed using the numeric LEDs of the keypad.
2. Press the CLEAR or ENTER key to cancel the display.
Clearing Alarm Memory
The alarm memory is cleared automatically next time you arm your EliteSuite System. To manually clear the
alarm memory use User menu option 3.
1. From the User Setup menu, press [MENU], 3
The current alarm memory, if any, will be displayed.
2. To clear the alarm memory press the FNC key then press the FORCE key (2).
If there was memory the device will emit a confirmation tone (four quick beeps) to indicate that it is now cleared.
If there was no memory then the device will emit a rejection tone
Chime Zones
A chime enabled zone will generate an audible tone every time that the zone opens, and is ideal for a front door.
Selecting Chime Zones

From the User Setup menu, press [MENU], 1

Toggle chime mode on any zone by pressing the number corresponding to the required zone.
The zone LED will be lit for each chime zone.

Press the ENTER key to store the chime settings and exit, or press the CLEAR key to exit without making
changes.
Disabling the Audible Output
You may choose to disable the audible tone on your keypad. This will prevent the beeper from generating any
notification of alarms, exit delay or entry delay. The keypad will continue to generate a tone when a key is
pressed and to provide audible confirmation.
1. Press and hold the [CLEAR] key.
2. The keypad will generate one long audible (rejection) tone to signify that the audible output is disabled.
To enable the audible output again, repeat the steps above. The keypad will generate four audible tones to
indicate that the audible output has been enabled.