Innovative Circuit Technology Ltd.
24
the e-mail settings must be fully configured on the
E-mail Setup
page for this
to occur.
User Setup
Use this page to configure passwords for up to 10 users, with the ability to limit
who has access to the panel settings. Click on the
Save Settings
button at the
bottom of the page to save any password changes.
The unit has no password assigned by default. For security reasons, an
Administrator password should be assigned to the panel as soon as possible to
prevent unauthorized access.
NOTE:
Record the new password for future access! If the Administrator password is lost
the unit must be reset to return the password to the blank default setting, causing
loss of all other user settings. See the
Password Reset
section for more details.
Select a User to Edit
:
Choose which of the user accounts to edit. Set the access
level to be appropriate for the amount of control each user requires.
Administrator:
This level has full access to the panel settings, and can set up
users and change passwords (“admin” is the default user)
Control:
User has read-only access to the panel, but can enable or disable the
outputs, and change some of the basic settings.
View-Only:
User can only view status, cannot change any settings.
New Password:
Use these fields to change the password of the selected user.
New Password
: Enter the new password for the chosen user.
Confirm New Password
: Re-enter the new password to confirm the entry.
Confirm Changes
: Enter the current
Administrator Password
to confirm the new
password changes, prior to saving the settings.
Maintenance
Use this page to reset the panel (soft reset), restore the panel default settings, or
send a test e-mail to verify e-mail functionality.
Reset Distribution Panel
: Clicking the
Reset
button will restart the panel. Channel
output states will be restored according to the
Output State after Panel Reset