ICStation GY20433, Руководство пользователя

Страница: 1 / 10

Calculator Module DIY Kit
1
Calculator Module DIY Kit
1.Introduction:
It is a calculator DIY soldering module.It can perform
addition,subtraction,multiplication,division,negative numbers,and decimal point operations.
2.Feature:
1).It uses in-line components and is easy to solder.
2).It doesn't require a computer,the calculator kit is pre-programmed.
3)It is powered by a single CR2032 battery and can be carried anywhere without being
tethered.
4).It can be turned on instantly,turned on at any time,and easy to use.
5).When not in use for a long time,it can automatically sleep,saving energy.
3.Parameter:
1).Product Name:Calculator DIY Soldering Module
2).Battery:CR2032
3).Digital Precision:6 digits
4).Welding Method:in-line component welding
5).Work Temperature:-25
℃
~85
℃
6).Work Humidity:5%~95%RH
7).Size(Installed):90*91*18mm
4.Precautions for Welding and Installation:
1).The components are soldered on the front of the board (screen printing surface),from
low to high,that is,first low-solder components,such as mega328 (pay attention to the IC
direction),capacitors,resistors,battery holders,then solder the switch,and finally solder the
digital tube .
2).Use diagonal pliers to cut the excess pins as short as possible.
5.Component Listing:
NO. Component Name PCB Marker Parameter QTY
1 Resistors R1-R6 10Kohm 6
2 Capacitance C1,C2 0.1uF 104 2
3 Digital Tube U1,U2 0.36inch 2
4 ATMEGA328P-PU Chip U3 DIP-28 1
5 CR2032 Battery BT1 3V 1
6 CR2032 Battery Holder BT1 26.5*20.5*3.7mm 1
7 Switch S1-S17 12*12*7.3mm 17
8 Square Blue Lid S1-S17 10*10*6mm 1
9 Square Transparent Lid S1-S17 11.6*11.6*5mm 1
10 Acrylic Sheet 100*92*2.1mm 2
11 Acrylic Sheet 80*10*2.1mm 2
12 Acrylic Sheet 90*10*2.1mm 2
13 Screws 8
14 Nut 4
15 PCB board 90*83*1.6mm 1
Note:Users can complete the installation according to the PCB silk screen and component list.
6.Debugging Steps:
1).Plug in the CR2032 battery,and the digital tube displays CAL 1.5,indicating that the
welding is successful.
2).Press the [C] Clear key to turn it on.
3).The calculator turns itself off after about 20 seconds of inactivity.
7.Application: