ICS Tunnel Master Jr, Руководство пользователя

Страница: 54 / 70

Tunnel Master® Jr. User Manual - Page 50
Chapter 6: Entrance Keypad
Entrance Keypad Functions
In order to utilize the full functionality of the Entrance Keypad, it is very important that the electrician adhere
to the wiring instructions provided with the Tunnel Master® Jr. relay box.
After selecting
service(s), but before
the Roller button,
press the $ button
and it will act as a
confirmation button
and prints a receipt
(optional printer
must be attached).
The up arrow button
will bump the
current shift, moving
the car counts back
to 0. Also if a printer
is set up, this will
print off the reports.
This works when the
input device is set to
either K or C.
The Car button is
the Roller button.
Power indicator
light. When lit,
indicates power to
Entrance Keypad.
Data indicator light.
When lit, indicates
data is being sent
fromTunnel Master®
Jr. to the Entrance
Keypad. (Used for
troubleshooting.)
Logic light indicates
active communications
between keypad board
and the keypad lid.
Numeric buttons
(1 - 16) are all
programmable and
used for entering
services or retracts.
The AC button displays
the stack with the
Tunnel Master® Jr.
Figure 6-1. Entrance Keypad Functions