ICS PCI-WDT 500, Руководство по эксплуатации продукта

Страница: 34 / 44

Manual Number: 00650-144-1 Page 25
Chapter 7: Specifications
Watchdog Timer
Time-out: Software selectable from 4 mSec to 2060 seconds.
Output Pulse Width:16 mSec minimum
Clock:
2.08333 MHz, derived from computer clock (331/3MHz÷16).
Address Continuously mappable within 0000 to FFFF hex I/O range.
Relay Output: DPDT, Form C, max. switching current 2A DCat 30W or 1.25A AC
at 30VA max.
Interrupt Output: PCI-INTA
Status Monitor Options
1. Voltages: IRQ and status register indication if +5, +12, or -12 V /-
6% of nominal.
2. Temp. Alarm: IRQ and status register indication at 122°F and above
3. Temp. Sensor: 8 bit ADC, LSB = 0.7°F (factory adjustable).
4. Fan Speed: IRQ and status register indication whenever tachometer output
drops below 50pps (custom factory settings available).
Buzzer: Audio Alert signals watchdog timeout.
LED Output: 5V, through 470 ohm resistor
Isolated Outputs: Complimentary opto-isolated reset outputs (2).
Isolated Inputs: Two, opto-isolated, 5 mA typical load. Can be read at base address
+ 4.
Environmental
Operating Temperature Range: 0
o
to +60
o
C
Storage Temperature Range: -50
o
to +120
o
C
Humidity: 10% to 90% RH, non-condensing
Power Required:
+5 VDC at 125 mA with no options, 250 mA with all options installed
Size:
6.7 inches long x 3.9 inches high (XT-height)