ICS Schneider Messtechnik induQ IVMZ.2 Series, Руководство по эксплуатации

Страница: 12 / 20

Electrical connection — IVMZ .2
- 12 - • Ba_ IVMZ .2_en • 06a/2021
5.1 Wirings
Pinout:
The pinout differs according to the chosen configuration of the device.
Pinout:
M12x1
Possible pinout:
Pin 1: +U
B
Pin 2: n. c. (not connected) / Analogue U/I
Pin 3: GND
Pin 4: Frequency

Connect the connection cable according to your version and the pinout on the type plate.
Supply voltage:
IVMZ .2 with frequency output:
Push-Pull: NPN Open Collector: PNP Open Collector:
*1: Push-Pull switching outputs of several IVMZ .2 may not be connected in parallel.
*2: Recommendation Pull-Up / Pull-Down resistance R
L
~2.5 k Ω (12 V) or ~5 k Ω (24 V).
Ensure that the maximum signal current of 25 mA is not exceeded.
Use of frequency and analogue output
Push-Pull: NPN Open Collector: PNP Open Collector:
Recommendation for resistance R
L
~2.5 k Ω (12 V) or ~5 k Ω (24 V).
Ensure that the maximum signal current of 25 mA is not exceeded.