USB 2.0 RG2304-LAN
4-Port USB 2.0 Ethernet LAN
Extender System
Quick
Start
Guide
1
2
3
4
Before you get started, ensure that all the drivers required for your USB device(s) are installed.
Connect the Remote Extender to
the AC adapter and a power source.
Connect the Local Extender to the
computer using the included USB
cable.
Attach USB device(s) to the Remote
Extender.
Computer
Max 100m
(Cat 5e cable not included)
1
Place extenders where desired and connect
the Cat 5e extension link cabling to the
Link ports (RJ45) on the Local and Remote
Extender.
Direct Connect
1
2
3
4
Connect the Local Extender to the
computer using the included USB
cable.
Place the Remote Extender where desired.
Connect the Cat 5e patch cable from the
Link port (RJ45) to a network switch or wall
network port connected to a switch and
connect the Remote Extender to a power
source.
1
Place the Local Extender where desired
and connect the Cat 5e patch cable from
the Link port (RJ45) to a network switch or
wall network port connected to a switch.
Network Connect
Attach USB device(s) to the Remote
Extender.
Link
Pair
Config
Host
Ac
tivit
y
Link
Po
wer
Link
Pair
Config
Link
Pair
DC IN 24V@1A
Config
Link
Pair
DC IN 24V@1A
Config
Link
Pair
Config
Host
Ac
tivit
y
Link
Po
wer
Computer
Link
Pair
Config
Link
Pair
DC IN 24V@1A
Config
Max 100m between network devices
Max 100m between network devices
Local Extender (back view)
Remote Extender (back view)
Remote Extender (front view)
90-01048-A04
