The LEX Unit
The LEX (Local Extender) unit connects to the computer using a standard USB-C cable (included). If the host supplies
15W, it can power the LEX. Alternately, power for this unit can be provided by the included 24V 1A adapter.
ITEM
TYPE
DESCRIPTION
1
Power LED
LED is SOLID GREEN when host is delivering sufficient power or AC adapter is connected to
the extender unit. LED is OFF when no power is supplied by the AC adapter or host.
LED is YELLOW if power from host is insufficient.
2
Mode
Reserved for manufacturer use.
3
Config
Reserved for manufacturer use.
4
Status LED
LED is SOLID ON when system is functioning normally. LED BLINKS when system is booting
or
to indicate a temperature warning in unison with the LINK, USB 2, and USB 3 LEDs.
5
Link LED
LED is SOLID ON when LEX is linked to an opposite REX.
LED is OFF when there is no connection between the LEX and REX units.
6
USB 2 LED
LED is SOLID ON when an active USB 2 connection is established through the extender
system. LED BLINKS when the USB 2 connection is suspended/asleep.
LED is OFF when no USB 2 connection is detected.
7
USB 3 LED
LED is SOLID ON when an active USB 3 connection is established through the extender
system. LED BLINKS when the USB 3 connection is suspended/asleep.
LED is OFF when no USB 3 connection is detected.
5
Con
fig
Status Link USB 2 USB 3
Mode
Power
1
2
3
4 5 6 7
8
9
10
11
24V 1A
1Gb Ethernet
Link
Host
Front Faceplate
Back Faceplate
