Read-only Username
Set the read-only username accessing the device, it is
public
by default.
You can enter number, letter, and underline to form the
name.
Read/Write Username
Set the read/write username access device, it is
public
by default.
You can enter number, letter, and underline to form the
name.
Authentication Type
You can select from
MD5
and
SHA
. The default type is
MD5
.
Authentication Password
It should be no less than 8 digits.
Encryption Type
The default is CBC-DES.
Encryption Password
It should be no less than 8 digits.
Result
Step 3 Click
Save
.
View device configuration through MIB Builder or MG-SOFT MIB Browser.
1.
Run MIB Builder and MG-SOFT MIB Browser.
2.
Compile the two MIB files with MIB Builder.
3.
Load the generated modules with MG-SOFT MIB Browser.
4.
Enter the IP address of the device you need to manage in the MG-SOFT MIB Browser, and
then select the version to search.
5.
Unfold all the tree lists displayed in the MG-SOFT MIB Browser,to view the
configuration information, video channel amount, audio channel amount, and software version.
Use a PC with Windows OS to disable SNMP Trap service. The MG-SOFT MIB Browser will display a
prompt when an alarm is triggered.
4.6.8 Bonjour
Bonjour allows for zero-configuration networking between different types of devices. You can use it to
find other Apple services on a network, connect to other devices like network printers (that provide
Bonjour support), or access shared drives.
Bonjour is enabled by default.
Procedure
87
Содержание Edge IPEG-D20F-IRW3
