ICPDAS I-8093W, Справочное руководство

Страница: 5 / 67

I-8093W/I-9093 I/O Module User Manual, v2.0.0 P. 5
Preface
I-8093W/I-9093 are 3-axis encoder counter board. I-8093W/I-9093 encoder card has 32 bits counter and
high counting rate 10Mpps. The application of I-8093W/I-9093 board is position/distance measurement,
velocity measurement, feedback for motor control, hard wheel input and so on.
The information contained in this manual is divided into the following topics:

Chapter 1, “ Introduction ” – This chapter provides information related to the hardware, such as the
specifications, the jumper settings details and wiring information.

Chapter 2, “ Quick Start ” – This chapter provides information on how to get started, an overview of
the location of the demo programs, a “Getting Started Guide”, and an outline of the calibration
process.

Chapter 3, “ Compare Trig Out ” – This chapter introduces the attributes related to the Compare Trig
Out function, the programming procedures, and demo programs.

Chapter 4, “ API References ” – This chapter provides some troubleshooting solutions should you
encounter any problems while operating the I-8093W/9093.