B-11
ACU for DOS
Type Keyword
Type
is a required keyword, indicating the array type. There is no
default value. The
Type
keyword values are:
Note:
For information about which array types your controller
supports, see
Wait Keyword
Wait
is an optional keyword that you can use to tell the ACU to
allow the ACU to continue while the build/verify or clear
completes in the background; specify
wait=no
. Otherwise, the
ACU waits by default.
Note:
If the host is powered off before the build/verify or clear
process completes and is then restarted, the process resumes
without any user intervention.
Examples
Wait=Yes
Wait=No
WriteCache Keyword
The
WriteCache
keyword indicates whether write caching is used
for this array if write caching is supported for the system. Possible
values are as follows:
■
Yes
(the
default
)—Enable the write cache.
■
No
—Disable the write cache.
Note:
Setting an array’s
WriteCache
keyword to
Yes
might
result in data loss or corruption during a power failure.
Example
WriteCache=Yes
■
Volume
■
RAID5
■
RAID0
■
RAID10
■
RAID1
■
RAID50
