A-15
ICP RAID Configuration Utility
Viewing the Event Log
The BIOS-based event log stores all firmware events (configuration
changes, array creation, boot activity, and so on).
The event log has a fixed size. Once full, old events are deleted as
new events are stored. Also, the log is cleared when the system is
restarted.
To access the event log:
1
Restart the computer, then press
Ctrl+A
when prompted to
access the ICP RAID Configuration utility.
2
If multiple controllers are installed, select the controller you
want to display events for, then press
Enter
.
3
From the ICP RAID Configuration utility menu, press
Ctrl+P
.
The Controller Service menu appears.
4
Select
Controller Log Information
, then press
Enter
. The
current log is displayed.
