A-9
ICP RAID Configuration Utility
Rescanning Drives
To rescan the drives connected to the controller:
1
Restart the computer, then press
Ctrl+A
when prompted to
access the ICP RAID Configuration utility.
2
From the ICP RAID Configuration utility menu, select
Array
Configuration Utility
.
3
Select
Rescan Drives
.
Using SCSI
Select
The SCSI
Select
Utility allows you to change controller and device
settings without opening the computer cabinet or handling the
controller. To access this utility:
1
Restart the computer, then press
Ctrl+A
when prompted to
access the ICP RAID Configuration utility.
2
If multiple controllers are installed, select the controller you
want to configure, then press
Enter
.
3
From the ICP RAID Configuration utility menu, select
SCSI
Select
Utility
.
To select a menu option, highlight it using the arrow keys, then
press
Enter
. In some cases, selecting an option displays another
menu. To return to the previous menu, press
Esc
.
To restore the original default values, return to Configure/View
Host Adapter Settings, then press
F6
.
4
To exit the utility, press
Esc
until a message prompts you to exit.
If you changed any settings, you are prompted to save the
changes before you exit. Choose
Yes
to exit and restart the
computer. Any changes you made take effect after restart.
