ICP ICP9014RO, Инструкция по установке и эксплуатации

Страница: 21 / 142

1-10
Introduction
Booting from the CD With No Operating System
The installation CD is bootable. You can use it to start a computer that
has no operating system and configure an array.
Note: To use the bootable CD, verify that your computer
supports bootable CDs. To do so, enter system Setup and
check the settings.
Using the CD Autorun in Windows
To use the Autorun executable,
autorun.exe
, start Windows and
insert the installation CD. Your computer automatically reads the
CD (provided it has been set up to do so).
Note: If your computer does not automatically read the CD,
you can prompt it to read the CD by clicking on
autorun.exe
from the CD’s root directory.
The CD presents the following options:
■
Install ICP Storage Manager
—Installs the management
software. For details, see Chapter 4 .
■
Install Adobe Acrobat Reader
—Installs Adobe Acrobat Reader
for Windows to let you view the ICP documentation in PDF
format. Versions of Acrobat Reader for other platforms are also
included, see
Installing the Adobe Acrobat Reader on page 1-11 .
■
View Release Notes
—Displays the
Readme
file containing the
latest information for ICP RAID products and software.
■
View Documentation
—Provides quick access to the PDF files.
■
Create Driver Diskette
—Allows you to create a driver disk for
any supported operating system.