ICP ICP9014RO Скачать руководство пользователя

Страница: 131 / 142

Glossary-4

Glossary

drive LED

Indicator light that illuminates during read or write operations.

event

Notification or alert from the system, indicating that a change has
occurred.

event log

File used to maintain information about prior controller activities
or errors.

event notification

Process for transmitting events.

failed

State of a non

redundant

array that has suffered a single drive

failure, or a redundant array that has suffered multiple drive
failures. A failed array is inaccessible and data is lost.

failed partition

partition

that is no longer usable by an array because it is either

logically bad and therefore no longer needed, or physically
damaged.

failover drive

See

hotspare

fault-tolerant array

Refers to an array that can continue to function after a disk drive
failure without loss of data. See also

redundant

foreign disk

Disk that has previously been initialized on another ICP RAID
controller. The RAID signature on the disk allows the RAID
controller to identify whether or not the disk was initialized on the
controller it is currently connected to.

Содержание ICP9014RO















































































































































Результаты поиска

Содержание ICP9014RO

Отзывы:

Похожие инструкции для ICP9014RO

Бренды по названию

Популярные бренды

ICP ICP9014RO, Инструкция по установке и эксплуатации

Результаты поиска

Содержание ICP9014RO

Отзывы:

Похожие инструкции для ICP9014RO

Бренды по названию

Популярные бренды