ICP ICP9014RO, Инструкция по установке и эксплуатации

Страница: 13 / 142

1-2
Introduction
Kit Contents
Your controller kit includes:
■
ICP9014RO or ICP9024RO RAID controller (illustrated in
Appendix H )
■
Installation CD
■
Low-profile bracket
■
Quick Installation Guide
Overview of the Installation Process
This section provides an overview of how to install and configure
the controller:
1 Install and configure the controller and hard disk drives, as
described in
Chapter 2, Installing the Controller and Drives .
2 Your next steps depend on your system:
In a system without an operating system (fresh install)...
a Build the bootable array, as described in Creating a Bootable
RAID 5 Array on page 2-4 .
b Install the driver at the beginning of the operating system
installation, as described in
Chapter 3 .
c Install ICP Storage Manager

as described in Chapter 4 .
d View, manage, and build additional arrays, as needed, using
ICP Storage Manager. For an overview, see
Chapter 5 . For
details, refer to the ICP Storage Manager online Help.
In an existing system that already has an operating system...
a Install the driver.
b Install ICP Storage Manager as described in Chapter 4 .
c Build the array using ICP Storage Manager. View, manage,
and build additional arrays, as needed. For an overview, see
Chapter 5 . For details, refer to the ICP Storage Manager
online Help.