D-13
Installing and Using the Command Line Utility
rescan
Enables the controller to
check for the removal of any
disk drives in the ready state
and to check for the
connection of any new disk
drives to the controller. The
command returns when the
rescan is complete.
HRCONF RESCAN controller
where:
controller
is the controller
number
Example:
HRCONF RESCAN 1
Return Values:
SUCCESS: 0x00 Indicates
the comand completed
successfully
FAILURE: 0x01 Indicates
the command failed
romupdate
Allows new firmware and
BIOS to be flashed to the
controller. A reboot is
required for the new
firmware to take effect.
Note:
This function is only
supported in Windows and
Linux.
ARCCONF ROMUPDATE
controller file path
where:
■
controller
is the
controller number
■
file path
is the relative
or absolute path to the
base firmware file name.
The base name is the first
6 letters and numbers of
the file (e.g., if the
firmware files are
ac220001.ufi
and
ac220002.ufi
, the file path
is
ac2200
).
Example:
ARCCONF ROMUPDATE 1
ac2200
Function
What it does
Command
