ICP ICP9014RO Скачать руководство пользователя

Страница: 101 / 142

D-2

Installing and Using the Command Line Utility

Introduction

This chapter provides the information needed to install, start, and
use the ARCCONF Command Line Utility. ARCCONF allows you
to configure and manage your RAID.

ARCCONF allows you to perform the following functions from the
command line:

■

Create backup copies of data.

■

Create logical drives.

■

Display or modify a limited set of configuration settings.

■

Copy configurations from one computer to another.

■

Recover from a failed physical drive and rebuild an affected
logical drive.

■

Isolate problems and determine their causes.

This utility is provided on the Installation CD.

Installing ARCCONF

Installing ARCCONF for Windows

Note:

For Windows, you must install ICP Storage Manager

before you can install ARCCONF. ARCCONF must be
installed in the same directory as ICP Storage Manager.

To install ARCCONF for Windows:

Start the computer.

After Windows starts, insert the Installation CD. If the CD starts
automatically, exit the installation program.

Содержание ICP9014RO















































































































































Результаты поиска

Содержание ICP9014RO

Отзывы:

Похожие инструкции для ICP9014RO

Бренды по названию

Популярные бренды

ICP ICP9014RO, Инструкция по установке и эксплуатации

Результаты поиска

Содержание ICP9014RO

Отзывы:

Похожие инструкции для ICP9014RO

Бренды по названию

Популярные бренды