ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
236
Figure11-51 :
Rule Status action setting page
Follow the steps below:
i
Specify the Rule (It has to be a previously saved Rule) that is going
to be changed in the Action Condition statement from the dropdown
list of the “Rule” field.
ii
Specify the Rule status to be Disable or Enable from the dropdown
list of the “Action” field. When the Action being executed, the Rule
status will be changed to specified status.
iii
Click “OK” button to confirm the settings and return to the Rule
settings page.
11.2.17
Internal Register
You can modify the value of Internal Register in the THEN/ELSE
Action statement; the editing page for Internal Register Action Setting
is shown as below:
Figure11-52 :
Internal Register action setting page
Follow the steps below:
i
Select the pre-defined Internal Register from the dropdown list of
the “No” field.
Please note: the Internal Register you select has to be
enabled in Advanced Setting.
ii
Specify the Operator in the “Operator” field. The 5 operators are as
follow:
“=”
：
Indicate assign the new Internal Register value as the
value in “Value” field.
“+=”
：
Indicate assign the new Internal Register value as the
